What is the Forschungszulage and how much can a company claim?

The Forschungszulage is Germany’s R&D tax credit, introduced by the Forschungszulagengesetz (FZulG) in January 2020.

Companies can claim 25% (35% for SMEs) of eligible R&D personnel costs and 70% of contract research costs, up to a maximum assessment base of EUR 10 million per year (EUR 12 million for projects starting from January 1, 2026), resulting in a maximum annual credit of up to EUR 3 million (EUR 4.2 million for SMEs at the 35% rate).


Germany introduced its first-ever R&D tax credit, the Forschungszulage, on January 1, 2020, through the Forschungszulagengesetz (FZulG). This marked a fundamental shift in German innovation policy, adding a broad-based, tax-system-delivered incentive to the country’s existing portfolio of direct R&D grants and project-based funding programs.

The Forschungszulage allows companies of all sizes to claim 25% of eligible R&D personnel costs, up to a maximum credit of EUR 2.5 million per year, directly against their tax liability or as a cash refund.

The 2026 Forschungszulage is explored comprehensively throughout this guide. Eligible activities, calculation methodology, BSFZ certification, implementation steps and interaction with broader German incentive programs are all covered in detail.

For information on other investment incentives, see our guide on Germany’s special economic zones. For startup-specific funding programs, see our guide on German startup grants and funding.

How the Forschungszulage Works

As a volume-based R&D tax credit, the Forschungszulage applies to the full amount of eligible R&D expenditure irrespective of whether the R&D project succeeds. This sets it apart from incremental R&D credits found in other countries, which work only on increases in R&D spending above a established baseline.

Calculation

The credit is calculated as follows:

Step 1: Determine the eligible assessment base (Bemessungsgrundlage).

  • In-house R&D can claim 100% of eligible personnel costs (gross wages including employer social insurance contributions) for personnel working on R&D activities.
  • For contract R&D: 60% of the contract value paid to third-party research contractors

Step 2. Apply the 25% credit rate to the assessment base.

Step 3. The maximum assessment base amounts to EUR 10 million per fiscal year, allowing for a maximum credit of EUR 2.5 million annually. The threshold was increased from the initial EUR 4 million level (EUR 1 million maximum credit) by the Wachstumschancengesetz (Growth Opportunities Act), effective as of March 2024.

R&D projects commencing on or after January 1, 2026, benefit from an even higher cap of a EUR 12 million assessment base (EUR 3 million maximum credit).

Step 4. The credit is applied against the company’s assessed income tax (Koerperschaftsteuer for corporations, Einkommensteuer for partnerships and sole proprietors) and Solidaritaetszuschlag. If the credit exceeds the tax liability, the excess is paid out as a cash refund.

Calculation Example

Component Amount
R&D employee gross wages (including employer social insurance) EUR 2,000,000
Contract R&D expenditure EUR 500,000
Eligible base: in-house (100% of wages) EUR 2,000,000
Eligible base: contract R&D (60% of EUR 500,000) EUR 300,000
Total assessment base EUR 2,300,000
Forschungszulage (25% of EUR 2,300,000) EUR 575,000
Company’s Koerperschaftsteuer + SolZ liability EUR 400,000
Credit applied against tax EUR 400,000
Cash refund of excess credit EUR 175,000

One of the Forschungszulage’s strongest features is the cash refund mechanism. Unlike R&D tax deductions that serve only profitable companies, this funding mechanism benefits every organization performing eligible R&D, including startups, pre-revenue firms and those in temporary loss situations.

Zero-taxable-income companies get the full credit amount as a cash disbursement from the Finanzamt. Early-stage tech companies pouring resources into product development before revenue begins find this tool particularly powerful.

Eligible R&D Activities

The Forschungszulage covers three categories of R&D activity, defined according to the OECD Frascati Manual (2015):

Basic Research (Grundlagenforschung)

Experimental or theoretical work undertaken primarily to acquire new knowledge of the underlying foundations of phenomena and observable facts, without any direct practical application or use in view. While basic research is eligible, it is predominantly conducted by universities and public research institutions rather than by commercial enterprises.

Applied Research (Angewandte Forschung)

Original investigation undertaken to acquire new knowledge directed primarily toward a specific practical aim or objective. Applied research is the most common category for commercial enterprises and includes activities such as developing new materials with specific performance characteristics, investigating new production processes and creating new analytical methods or measurement techniques.

Experimental Development (Experimentelle Entwicklung)

Systematic work drawing on knowledge gained from research and practical experience, directed toward producing new materials, products, devices, processes, systems, or services, or substantially improving those already produced or installed. This is the broadest category and the one most relevant to commercial R&D.

What Does NOT Qualify

The following activities are explicitly excluded from the Forschungszulage:

  • Routine software development and maintenance
  • Quality control and standard testing
  • Data collection for purposes other than research.
  • Market research and consumer surveys
  • Adaptation of existing products or processes for individual customer requirements without novel technical challenge
  • Production ramp-up and tooling for manufacturing
  • While the underlying research may qualify, administrative and legal work surrounding patents falls outside that scope.
  • Design and aesthetic changes without technological innovation

The Novelty and Uncertainty Test

Novelty requires that the work generates knowledge or capabilities new to the company, whether or not that knowledge is new to the world. The approach must tackle scientific or technological uncertainty where outcomes cannot be predicted with confidence from existing knowledge and the method for meeting the objective is not evident.

The novelty and uncertainty criteria are where many Forschungszulage applications encounter difficulty. The BSFZ (certification body) applies these tests rigorously, and projects that describe routine engineering, incremental product improvements, or standard software development are regularly rejected.

Applicants should clearly articulate what is unknown at the outset of the project, what technical challenges must be overcome, and why existing knowledge and techniques are insufficient.

Describing the project in terms of specific technical objectives and the scientific or engineering uncertainties that must be resolved is far more effective than describing it in terms of business goals or market outcomes.

The BSFZ Certification Process

Certification of R&D project eligibility for the Forschungszulage comes from the independent Bescheinigungsstelle Forschungszulage (BSFZ). This body is managed by a consortium that includes VDI Technologiezentrum, DLR Projekttraeger, AiF Projekt and Forschungszentrum Juelich.

Application Steps

Step 1: Prepare the Project Description. Work on a structured description for every R&D project that includes project objectives, the knowledge state at launch, technical challenges and uncertainties, the methodology plan, anticipated results and the timeline.

Step 2: Submit the BSFZ Application. Applications are submitted electronically through the BSFZ portal (www.bescheinigung-forschungszulage.de). There is no application deadline; applications can be submitted at any time during or after the fiscal year in which the R&D was conducted.

Step 3: BSFZ Review. Expert panels within the BSFZ evaluate applications using their relevant scientific and technical knowledge. Reviews concentrate on whether the proposed activities conform to the Frascati Manual’s R&D definitions. The BSFZ panel reserves the right to request further information or clarification.

Step 4: Certification Decision. The BSFZ issues a certification (Bescheinigung) confirming that the described project qualifies as R&D within the meaning of the FZulG. The certification specifies the project and the eligible period but does not assess the amount of the credit.

Step 5: Claim the Credit with the Finanzamt. Using the BSFZ certification, the company submits a Forschungszulage application (Form FZ1) to its local Finanzamt along with documentation of the eligible R&D costs. The Finanzamt determines the credit amount and applies it against the tax assessment.

BSFZ Processing Times and Practical Considerations

The BSFZ aims to process applications within three months, though complex applications may take longer. The certification can be obtained retroactively for prior fiscal years (the Forschungszulage can be claimed for fiscal years from 2020 onward), allowing companies that were unaware of the credit to file retrospective claims.

Processing Step Typical Timeline
BSFZ application preparation 1-4 weeks
BSFZ review and decision 2-4 months
Finanzamt application and processing 2-6 months
Credit offset or refund disbursement With annual tax assessment

Firms must not delay the Forschungszulage workflow until tax return time. Since BSFZ certification and Finanzamt credit application are separate steps, submitting the BSFZ application early speeds the entire process.

Organizations performing R&D on a continuous basis should build an annual cycle for identifying qualifying projects, documenting R&D work, monitoring personnel time and submitting BSFZ applications on a rolling basis instead of batching them at year-end.

Personnel Cost Documentation

Since personnel costs drive the Forschungszulage calculation, documentation of the time employees devote to eligible R&D activities becomes crucially important.

Eligible Personnel Costs

The eligible assessment base includes gross wages (Bruttolohn), employer social insurance contributions (Arbeitgeberanteile zur Sozialversicherung), and other wage-related costs that are part of the employment cost. It does not include travel expenses, material costs, depreciation of equipment, or overhead allocations.

Time Tracking Requirements

Employees dividing time between R&D and non-R&D work require the company to keep simultaneous time documentation showing hours allocated to eligible R&D projects. The Finanzamt can request these records as part of the credit assessment or during a later tax audit.

Projects can be tracked using approved methods including Jira, Clockify and other project time tracking systems, signed monthly time allocation reports from employees and project managers, and project management documentation that demonstrates task assignments and completion statuses.

For employees who work exclusively on a single eligible R&D project, a declaration by the employer confirming 100% allocation to the project is sufficient, but the underlying project documentation must support this claim.

Interaction with Other Incentives

While the Forschungszulage can be combined with other German incentive programs broadly speaking, cumulation rules that must be observed are critically important.

Forschungszulage and GRW Grants

R&D costs backed by a GRW grant or any direct public subsidy are not eligible for the Forschungszulage. When R&D personnel costs include a GRW grant contribution, only the unfunded balance can be used in Forschungszulage calculations. Information on GRW grants can be found in our guide to Germany’s special economic zones and investment incentives.

Forschungszulage and EXIST

EXIST-funded personnel costs are public subsidies and cannot simultaneously be claimed under the Forschungszulage. However, R&D costs incurred after the EXIST funding period ends are fully eligible.

Forschungszulage and ZIM/BMBF Project Grants

Similarly, R&D costs funded by ZIM (Zentrales Innovationsprogramm Mittelstand) or BMBF (Bundesministerium fuer Bildung und Forschung) project grants cannot be included in the Forschungszulage assessment base. The unfunded co-financing portion contributed by the company remains eligible.

Group Company Rules

For affiliated companies within a group (Konzern), the EUR 10 million maximum assessment base (EUR 12 million for projects starting from January 1, 2026) applies to the entire group, not to each individual entity. Connected and partner enterprises (as defined by EU Commission Recommendation 2003/361/EC) must aggregate their assessment bases and share the group cap.

International Comparison: Germany’s R&D Tax Credit in Context

Germany was one of the last major economies to introduce an R&D tax credit, joining a program that most OECD countries have operated for decades. Understanding how the Forschungszulage compares internationally helps companies with operations in multiple countries optimize their global R&D incentive strategy.

Country R&D Tax Credit Rate Maximum Benefit Refundable Volume or Incremental
Germany 25% of personnel costs EUR 2.5 million/year Yes (cash refund) Volume-based
France (CIR) 30% of R&D expenses (first EUR 100M) No cap (30% rate, 5% above EUR 100M) Yes (after 3 years, immediate for SMEs) Volume-based
United Kingdom 20% above-the-line credit (merged scheme) No cap Yes (for loss-making companies) Volume-based
Netherlands (WBSO) 32% of first EUR 350K, 16% remainder ~EUR 14 million/year Wage tax offset Volume-based
Ireland 25% of qualifying expenditure No cap Yes (partially) Volume-based
United States 20% (regular) or 14% (alternative simplified) No cap Limited refundability Incremental (regular)

Germany’s Forschungszulage is more limited than the French CIR or British R&D tax credit in terms of the maximum benefit (EUR 2.5 million cap versus uncapped in France and the UK). However, the full cash refundability and the relatively straightforward calculation methodology make it accessible and valuable, particularly for SMEs and startups.

Common Mistakes in Forschungszulage Claims

Based on publicly available BSFZ statistics and practitioner experience, several recurring errors reduce the value or delay the processing of Forschungszulage claims:

Insufficient Project Descriptions. The most common reason for BSFZ rejections is that the project description reads like a product development specification rather than an R&D project description. The BSFZ evaluates scientific and technological novelty, not commercial innovation.

Describing the project in terms of the technical uncertainties to be overcome, rather than the market problem being solved, is essential.

Failing to Separate R&D from Routine Development. true R&D within a development team applies only to work carrying genuine technical uncertainty. Bug fixes, UI refinements, custom feature adjustments for individual customers and standard integrations do not qualify as R&D. Time allocation must deliberately divide qualifying and non-qualifying activities.

Inaccurate Time Allocation. Assigning 100% R&D allocation to employees who perform non-R&D duties like project management, sales support and customer service will not pass a Finanzamt review. Auditable time allocation must be realistic and backed by contemporaneous records.

Missing the Contract R&D 60% Rule. Outsourced R&D includes only 60% of the contract value in the assessment base. Some companies include the full 100% in their calculations, resulting in Finanzamt application errors.

Ignoring Group Cap Coordination: Group companies that independently file Forschungszulage claims without coordinating risk exceeding the aggregate EUR 10 million cap (EUR 12 million for projects starting from January 1, 2026), which can trigger correction assessments and interest charges.

The Forschungszulage is still a relatively young program, and both the BSFZ and the Finanzaemter are developing their assessment practices. Companies that file well-documented, clearly articulated applications contribute to building a positive track record that benefits the broader R&D community.

Conversely, inflated or poorly substantiated claims may lead to increased scrutiny for future applications. Treating the Forschungszulage application with the same rigor as an R&D grant application, rather than as a routine tax compliance exercise, produces the best outcomes.

Practical Recommendations

Start Documentation Now. Even if you do not plan to file a Forschungszulage claim immediately, begin tracking R&D personnel time and maintaining project documentation. Retrospective reconstruction of time records is difficult and unreliable.

Engage an R&D Tax Specialist. The intersection of technical R&D assessment and tax law makes the Forschungszulage a specialized area. Tax advisors with specific Forschungszulage experience can help identify qualifying projects that companies might overlook and prepare BSFZ applications that clearly articulate the novelty and uncertainty criteria.

Think Broadly About Eligible Activities. Companies often underestimate their qualifying R&D. Activities such as developing new manufacturing processes, creating proprietary algorithms, designing novel materials and building prototype systems may all qualify if they involve genuine technical uncertainty.

Plan for the Group Cap. If your company is part of a group, coordinate Forschungszulage claims across all group entities to ensure the EUR 10 million cap (rising to EUR 12 million for projects starting from January 1, 2026) is allocated optimally.

For information on the tax framework in which the Forschungszulage operates, see our guides on Germany corporate tax rates and German VAT. For company formation guidance, see our guide on registering a company in Germany.